Basic Info.
Model NO.
GW800
Frequency Range
Low Frequency
Electric Current
800W
Style
Handheld
Power
Electric
Voltage
230V
Frequency
50/60Hz
Welding Speed
0.5-5m/Min
Heating Temperature
0-450c
Thickness of Material to Be Welded
0.2mm-1.5mm
Overlap Width
10cm
Welding Width
12.5mm*2, Interior Cavity 12mm
Seam Strength
85% or Less Base on Material
Insulation Class
II
Type
Plastic Welders
Current
Alternating Current
Transport Package
Aluminium Packing Box
Specification
GW800
Trademark
OBOR
Origin
Taian, Shandong, China
HS Code
8515809090
Production Capacity
10/Day
Product Description
Geomembrane Welding Machine-GW800/GW800D
1.Geomembrane Welding machine description: 
GW800 Geomembrane welding machine can weld geo-membrane of various thickness and are applicable for welding of all thermal-fused material such as LDPE, PVC, HDPE, EVA, PP and so on.
The control of this series of welding machine adopts PID automatic thermostatic control with high control accuracy and low temperature fluctuation; speed control adopts PWM automatic voltage and speed regulation circuit, driven by DC servo motor, with great output torque and the operating is stable.
It can maintain a constant speed on the condition of creeping, vertical creeping and variable road load. Also this series of welding machine is stable in performance despite of external temperature and voltage variation.
There are two types GW800 and GW800D (with display screen) for your option.
2.Geomembrane Welder Technical parameter:
| Brand & Type | GW800 Geomembrane Welding Machine |
| Certificate | CERoHS |
| Voltage | 220V/110V/Customized |
| Power | 800W |
| Frequency | 50/60Hz |
| Welding Speed | 0-6m/min |
| Heating temperature | 20-450ºC |
| Thickness of material | 0.5-1.5mm |
| Overlap width | 100mm |
| Welding width | 15mm×2, interior cavity 15mm |
| Seam strength | ≥85% base material(tensile resistant in shear direction) |
| Net Weight | 5kg |
| Gross Weight | 8.5kg |
| Insulation class | Class II |
| Usage | China geomembrane wedge welder |
| Plug Standard | Euro Plug/ U.S. Plug/British Plug/Plug adaptor |
3.Main components
4. Package
Package size: 345mm*200mm*245mm Weight:8.5KG 5.Operating regulations
1.)Use with grounded 3-cord mains cable and 3-hole socker with capacity not less than 10A (socket corresponds with welder plug,phase L connected to live wire ,N to zero line ,phase to grounded protection liner),confirm that external lines have been well connected .Check that power is on off state and regulate temperature control potentiometer and speed control potentiometer to 0 position ,press lever handle down to disengage pressure roller ,then insert the plug.
2). Turn on the power and select certain temperature and speed, take several narrow materials for try welding. Temperature selection may be different for the same material at different ambient temperature and material thickness. To determine the best welding effect, adjust the speed to approximately 2m/min, and then fine increase it from low to high temperature -approximately 250ºC-350.
3). Flatly and straightly trim the weld edges and frontage faced, with lower left and upper right overlapped. The overlap width is 100mm.
4). After temperature and speed have been determined, insert material to be welded between the two pressure rollers, make machine body parallel with edges of base materials and engage press lever handle for proper motion. Generally, only observation of deviation between welding mark and base materials is needed for operator, and timely make correction on small degree.
5). When welding will be ended, timely press lever handle to disengage upper and lower pressure roller to prevent rubber wheel damage for long duration.
6). Excessive temperature high and low may occur because of thermal inertia. On this condition, temperature deviation may be compensated by speed regulation on a small degree.
6.Application
Shandong OBOR New Materials Co., Ltd
Taian. Shandong. China