Basic Info.
Model NO.
DLMIG-200A
Rated Inpute Capacity
6.6kVA
out Put Current(MIG)
30-180A
out Put Current(MMA)
20-160A
out Put Current(TIG)
20-160A
Power Factor
Cos 0.93
Duty Cycle
60%
Protective Grade of Housing
IP23
Packing
45*29*44cm
Transport Package
Carton
Specification
(110V, 50/60Hz, 1Ph)(220V, 50/60Hz, 1Ph)
Trademark
DELE
Origin
Hangzhou of China
HS Code
84251900
Production Capacity
10000/Month
Product Description
Certifications
Products Description
DLMIG 200 ALU SYNERGY welder is a light, portable semi-automatic welding machine made in inverter technology, powered from a single-phase 230V network with a maximum welding current of 200A. The device is equipped with a large numeric and graphic LCD screen with an intuitive, easy-to-use control panel. The synergy function used in the device allows for quick setting of welding parameters.
ADVANTAGES OF THE DEVICE: 3 YEARS WARANTY
- MCU program control system
- Special for carbon steel , stainless steel , aluminium , copper
- Multi-Function:MIG/MAG+MMA+LIFT TIG
- welding in synergic and manual mode
- braze welding
- inductance regulation
- 2T, 4T function
- welding without gas
- TIG LIFT welding
- SPOOL GUN ready
- MMA synergic welding
- selection of the type of electrodes
- graphic selection of the thickness of the welded material
- solid metal feeder
The power source was built on the basis of the latest technology using IGBT transistors, which translates into a reduction of electromagnetic interference, low power losses, increased efficiency and reliability of the power source and lower energy consumption.
The device has smooth adjustment of welding parameters, is equipped with an overload thermal protection system to prevent overheating. The welder is equipped with a 2-roll wire feeder with a socket "euro connector" which allows the connection of various types of welding holders.
SET CONTAINS:
- Welding device
- MIG / MAG work cable
- MMA work cable
- Cable with a ground clamp
-Teflon liner and U roller for aluminium welding
- Manual user instructions.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1.Special design for multi-function mig machine,easy for synergy welding program set up.
2.Special design for the fan ,fan will not start running unless machine start to weld,when machine rest more than 15 minutes,fan will stop running ,it can maximum increase the fan's working life and save power.
3.2T/4T optional choice is available ,burn back +spool gun is ready,deductance can be well adjusted.
4.Special design for aluminium wire welding ,can weld 1.0mm+1.2mm aluminium wire,also CuSi wire can be welded.
5.Synergy mode is friendly set up,meanwhile ,users can also adjust wire feeder speed and output voltage when already set up for synergy mode,it makes more flexible for users and bring users perfect welding performance.
6.Generator can be friendly used once needed,1/5 Kg wire is ready for spool inside machine.
7.Flux welding is available (No Welding)
DLMIG 200 ALU SYNERGY welder is a light, portable semi-automatic welding machine made in inverter technology, powered from a single-phase 230V network with a maximum welding current of 200A. The device is equipped with a large numeric and graphic LCD screen with an intuitive, easy-to-use control panel. The synergy function used in the device allows for quick setting of welding parameters.
ADVANTAGES OF THE DEVICE: 3 YEARS WARANTY
- MCU program control system
- Special for carbon steel , stainless steel , aluminium , copper
- Multi-Function:MIG/MAG+MMA+LIFT TIG
- welding in synergic and manual mode
- braze welding
- inductance regulation
- 2T, 4T function
- welding without gas
- TIG LIFT welding
- SPOOL GUN ready
- MMA synergic welding
- selection of the type of electrodes
- graphic selection of the thickness of the welded material
- solid metal feeder
The power source was built on the basis of the latest technology using IGBT transistors, which translates into a reduction of electromagnetic interference, low power losses, increased efficiency and reliability of the power source and lower energy consumption.
The device has smooth adjustment of welding parameters, is equipped with an overload thermal protection system to prevent overheating. The welder is equipped with a 2-roll wire feeder with a socket "euro connector" which allows the connection of various types of welding holders.
SET CONTAINS:
- Welding device
- MIG / MAG work cable
- MMA work cable
- Cable with a ground clamp,
-Teflon liner and U roller for aluminium welding
- Manual user instructions.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1)3 meters MB24 euro MIG torch.
2)3 meters 200A welding clamp.
3)3 meters 300A earthclamp.
4)mask+brush+3 meters tube.
5)3 .5meters teflon for Alu wire welding
.
6)one U roller 1.0/1.2 mm for Alu wire welding.
Custom-made
Complete set(packing)
|
Factory 
Payment
Our Service
FAQ
Q1. What's information should I provide to get the price?
A:1. Chain quality? 2.the chain size? 3. the working voltage? 4. the machine frequency?
Q2. What's the lead time for regular order?
A: The normal delivery time is 60-120 days. If you have special needs or if the quantity is greater than 1 set, please explain
when making an inquiry. When we quote, we will provide you with accurate delivery time according to the actual situation.
Q3. The space of my workshop is limited, can the machine is ok for me?
A: We have been specializing in European machines for 20 years. Machines are one of the biggest features of our products.According to your needs, our designers will tailor-made products suitable for your use.
Q4.Can you provide lifting tools?
A: Yes, we can provide any type of lifting tools such as Manual chain hoists, manual lever chain hoist, electric chains
hoists,chains, slings, hooks, electromagnetics, grabs, beams, etc.non-standard fixtures, etc... Welcome to consult
Q5. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q6. Are there any professional technicians to assist our installation?
A: Yes. We have a professional installation team, who has already been to many countries to assist the installation. If you need our technicians to offer this service, please let us know in advance. So that we can arrange the suitable technicians to your country.
Q7. How do you ship the goods and how long does it take to arrive?
A: Small products can be transported by air, and large products can be transported by sea. According to different countries and regions, the specific time will be confirmed according to the actual situation.
Q8. What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment. We'll show you the photos or videos of the products and packages before you pay the balance.
Q9. What is your terms of packing?
A: Generally, we pack our goods in neutral wooden boxes. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters. There is no package of big machines,there are just protective covers.
Q10. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q11. How to proceed an order for hoist?
A: Firstly let us know your requirements or application:Hoists capacity, chains length and others? Secondly We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.
Q12. Do you offer guarantee for the products?
A: Yes, we offer 1-3 years warranty to our products.