- Overview
- Product Description
- Company Profile
- Certifications
- Exhibition Display
- WHY CHOOSE US
- PRODUCT SERIES
- FAQ
Basic Info.
Product Description
SUBSTRATE
Energy storage stud welder Especially suitable for 0.5-2mm sheet welding, can be stainless steel, carbon steel, galvanized sheet, aluminumbrass and other common metals welding (stud material needs to be similar to the substrate or the same); Thesurface of the plate should be clean and tidy, good electrical conductivity.
This capacitor discharge stud welder is generally used for welding studs with a diameter of 2-10 mm, Stud welded end face must have a precise smallconvex and a certain cone Angle.
PROCESS ADVANTAGE
Low stud cost; Low equipment cost; Fast welding process; The fixture is easy to use; No porcelain rings, no gasprotection, no polishing.
APPLICATION INDUSTRY
Electric cabinet manufacturing, kitchen and bath household appliances manufacturing, elevator manufacturingsign fixing industry, aluminum curtain wall decoration industry, HVAC insulation industry. etc.
Arc Stud Welder configuration and technical parameters
| Drawn Arc Stud Welder | RC-SP-16 | RC-SP-25 |
| Arc stud size | M3-M16; φ2-15mm | |
| Stud material | Stainless steel and heat-resistant steel Welding aluminum can also be welded with special equipment | |
| Welding current | 100A~1600A | 100A~2200A |
| Welding time | 1-1500ms | |
| Arcing time | 0.2-3s | |
| Ventilatory protection time | 0.2-3s | |
| Short period arc ignition time | 1-500ms | |
| Welding rate | 15-30 studs/minute (welding M3 or φ2mm) 5 studs/minute (welding M12) | |
| Power Supply | AC 380V±10%/50Hz (three-phase five-wire) | |
| Instantaneous current | 3×380V AC 60A/phase | |
| Open circuit voltage | 30~60V | |
| Rated power | 48kW | |
| Ingress Protection | IP21 | |
| Protective gas flow | 4-5L/min | |
Established in 1993, Luoyang Ruichuang Electrical Equipment Co, Ltd. is located in the High-techDevelopment Zone of China (Henan) Free Trade Zone. it is a high-tech enterprise integrating R8D, desigrmanutacture. insta ation and service. The companv has advanced manacement con cents, hioh-oualittalents, first-class research and development capabilities, advanced processing equipment, completeproduction chain, strict quality inspection system, and professional service team innovation is the inexhaustible driving force for our development. Since its establishment in 1993, our company has beercommitted to the development of high and low voltage power distribution equioment, sheet metaprocessing equipment (polyurethane foam sealing machine, industria inkjet printing machine, stud welding machine), customized automation Solutions, robots, etc. The vears otexperience and technology accumulation in the sheet metal industry enable Ruichuang to providecustomers with the most efficient and flexible automation solutions.The product has high degree ofautomation, reliable performance and simple operation, and has gained trust and support from customersat home and abroad.
SHORT PERIOD DRAWN ARC STUD WELDER
·It can weld stud in the range of M3-M16, energy storage welding nail can also be welded by this process, can extend arcwelding, welding ordinary nuts;
·The short-cycle process can penetrate the workpiece better than the energy storage process, and this process is moresuitable when the surface of the workpiece is uneven;
·Can be low carbon steel, stainless steel, heat-resistant copper and other metals welding, base metal surface is not reqular.
APPLICATION INDUSTRIES:
Shipbuilding industry,boiler industry.metal furniture manufacturing, machineryand equipment manufacturing, rail carmanufacturing, etc.
LONG PERIOD ARC DRAWING STUD WELDER
The use of advanced IGBT inverter technology, welding time is longer, the melting pool is deeper, the diameter of the weldedstud is larger, the surface quality requirements of the plate is lower, allowing the surface of the workpiece to bend, irreqularespecially suitable for the welding of 2mm and above thick plates, can be welded to low carbon steel, stainless steel, for thediameter of more than 12mm stud recommended to use magnetic ring for protection welding.
HANDHELD SINGLE-CHANNEL ENERGY STORAGE STUD WELDING MACHINE
·Optimized structure design, under the premise of ensuring capacity, smal size, uniform weight distribution, easy to carry oron-site mobile operation.
·Simple operation, powerful function.
·The current capacitance voltage or set voltage is displayed with a three-section nixie tube, and the required dischargevoltage can be easily and flexibly configured through buttons and indicators.
RC-CHJ-3500S
Basic version
Welding stud diameter: M2-M10
Stud length: 5-210mm
Welding material: stainless steel, carbon steel, galvanized sheet, aluminum, brass
Weldable sheet thickness: 0.5-10mm
Use domestic large brands thyristor, MOS tube Standard capacitance
High-end version
Stud diameter: M2-M10
Stud length: 5-210mm
Welding material: stainless steel, carbon steel, galvanized sheet, aluminum, brass
Weldable sheet thickness: 0.5-10mm
Use Germany imported Infineon and the United States Litte thyristor Increase the capacitance capacity by 1/3
High-end version with touch screen
Add touch screen control on the basis of orange high configurationversion, use touch screen to replace the traditional digital tube;
Model No.:RC-CHJ-4600SP
Smart version with touch screen
On the basis of black with touch high configuration version, it adds our company'sunique welding current monitoring function, which can effectively prevent the virtualwelding caused by insufficient discharge during welding.
Double Capacity Stud Welding Machine
Our company independently developed double capaictor discharge stud welding machine, this series of welding machineare two sets of capacitor mode, when the use of one set of capacitors work, the other set of capacitors as a backup oiconnect the manual welding gun manual operation, fully improve the efficiency of use. Using high-speed single-chipmicrocomputer control system, through multi-level matching PlD algorithm for capacitor charging control, charging speedleading the industry!
Basic version
Welding stud diameter: M2-M10
Stud length: 5-210mm
Dual capacity
Welding material: stainless steel, carbon steel, galvanized sheet, aluminum, brass
Weldable sheet thickness: 0.5-10mm
Use domestic large brands thyristor, MOS tube Standard capacitance
High-end version
Stud diameter: M2-M10
Stud length: 5-210mm
Touch Screen control
Welding material: stainless steel, carbon steel, galvanized sheet, aluminum, brass
Weldable sheet thickness: 0.5-10mm
With the function of communication with equipment, welding machine internal use of Germany imported Infineon and the United States Litte thyristor
Adopt customized energy storage welding machine special domestic first-line brand Jianghai electrolytic capacitor
Two sets of capacitors, each increasing the capacity by 1/3
Smart version
Welding stud diameter: M2-M10
Stud length: 5-210mm
Touch Screen control, discharge circuit detection function
Welding material: stainless steel, carbon steel, galvanized sheet, aluminum, brass
Weldable sheet thickness: 0.5-10mm
With the function of communication with equipment, welding machine internal use of Germany imported Infineon and the United States Litte thyristor
Adopt customized energy storage welding machine special domestic first-line brand Jianghai electrolytic capacitor
Two sets of capacitors, each increasing the capacity by 1/3
OUR SERVICE
Consulting and training
Our team of stud welder technology engineers and expertshave many years of experience and field testing techniques.
Our team provides application-related consulting andcustomization services through training courses andseminars.
After the equipment is put in place, our company will send professional technicians to the customer site for a period of time.
5.7 days of installation and commissioning training services
After sales service
All software and source programs are independently developed by our company to provide efficient after-sales service for customers.
The company has trained a professional after-sales service team to provide customers with 24-hour online service.
The technician wil be dispatched to the customer site within 48 hours once needed.
Question 1: What are your advantages compared with your competitors?
Answer: With rich industry experience and strict Product Quality Control systems, we provide: 1. Stable and reliable product at reasonable price 2. Good customer service: Fast response to any inquiry or question 3. On-time delivery.4. Competitive price.
Question 2: Are you manufactory?
Answer: Yes, we are professional factory in China with more than 15 years' experience.
Question 3: What are your Price Terms?
Answer: Price can be based on EXW, FOB, CFR, CIF, etc.
Question 4: What are your Payment Terms?
Answer: Payment shall be made by T/T, L/C etc. Question 5: What's your Minimum Order Quantity? Answer: Any order quantity is warmly welcomed.
Question 6: Do you have English Manual for each stud welder?
Answer: Yes. The instruction manual,the test report and other Data Sheets related shall be provided by us.
Question 7: Can I print my Logo on the Arc Stud Welder?
Answer: Yes, sure.
Question 8: Can you customize the Drawn Arc Studs Nuts Welding machine for me ?
Answer: Yes, we can customize according to customer's requirements.