The KA-H10 flexible rail welding car is a welding equipment driven by gear shifts on the track. It is widely used in horizontal welding and vertical welding. It is especially suitable for mid-thick welding and large pipeline seam welding. By adjusting the position and angle of the welding gun, corner welding, horizontal welding and suckling welding can also be performed. The car body, swinging device, and control panel are split, which can be welded on the track. The track is sucking on the workpiece with powerful magnets, and it is convenient to install and disassemble.

2. Features
1) KA-H10 to achieve vertical welding, horizontal welding, ring seam welding and horizontal welding.
2) Have a straight line swing function. Various swing parameters such as swing mode, swinging amplitude, swing speed, swing center position and left and right stay time can be adjusted.
3) Use digital to display the running speed of the car.
4) In order to prevent the emergence of the bite and insufficient welding when welding, the left and right swing stop time adjustment function is set.
5) The welded torch is automatically returned to the center of the welding channel when the welding stops.
6) Have an automatic arc collection function.
7) Have a fast return function.
8) Standard configuration provides a 1.8 -long track. The rail miniaturization light movement is convenient, and it can also be connected to extend the use.

1.DC motor: The power device for walking in a car. Use AC220V power supply. Or choose 24V lithium battery
2.Rail: Flexible orbit/hard track, there is a certain period of elasticity, the standard configuration is 1.8 meters, which can be extended to use.
3.Switch magnet: Fixed device of the track. It can generate 60kg suction and can be firmly adsorbed on the workpiece. With a removed handle, it is convenient for the disassembly and movement of the track.
4. Main control box: The control center of the car, all movements are controlled.
5.Quick clutch: car rail wheel clutch device. Move the clutch up and move to the left is the clutch. It can quickly drive the car.
6.X-Y fine-tuning slide: regulatory agency at the location of the welded gun. The adjustment range of the X direction is ± 20mm, and the adjustment range of the Y direction is ± 20mm.
7.Swelling motor (swing head): driver device of the swinger. Using high -precision DC motor, its power is 6W.
8.Welding Tromaton: The holding device of the welded torch. The angle of the welded gun can be adjusted and the range is ± 90 °.
9.Adjust the hand wheel: When installing the track, twist the hand wheel to the left or right, and use it to press the track and release the track

 

1) Welding/non -welding" switch: Enter the welding preparation status when selecting the "welding" position, and press the "start" switch for welding; press the "start" switch when the "non -welding" position is selected. Essence
(2) Start" switch: The switch is turned on and the car starts to walk. The welding "position is only walking but not welding.
(3) Stop" switch: If you press the stop switch during the trips of the car, all the actions will stop.
(4) Up Down: You can choose to walk up or down.
(5) Walking speed: The speed value is displayed in digital, the maximum walking speed is 1040mm/min, and the digital display value is 999.
(6) Switching speed adjustment knob: Rotate the swing swing speed in clockwise, the maximum value is 1520mm/min. The maximum scale is 10.
(7) swing range: The amplitude of the swing of clockwise rotation increases, and the maximum value is 20mm. The maximum scale is 10.
(8) Stop time adjustment knob: The adjustment range is 0 ~ 2S, and clockwise increases.
(9) Right stop time adjustment knob: The range is 0 ~ 2s, and clockwise increases.
(10) left right center moving: When rotating clockwise, the center will move to the right, and the center will move to the left when the clockwise rotation counterclockwise, and the maximum range of movement is ± 5mm. The maximum scale value is represented by scale value.
(11) swing choice: Use this knob to select the swing mode. There are five types of swing mode of the car. Except for the first one is the non -swing mode, the rest is as follows: 

1.Q:Are you a factory or trading company?
A, Yes we are the trading company,but we have a lot of factories that have cooperative relationships, and we can get the best plan and price for you.

2.Q:Does the machine have CE certificate?
A:Yes, others certifications also can be sent

3.Q:What's the shipping method?
A: International express and sea transportation,Depend on customer.

4.Q:Can I use my own forwarder to transport the products for me?
A:Yes, if you have your own forwarder in China, you can let your forwarder ship the products for you.

5.Q:What's the Payment method?
A:T/T,L/C and other payment method, Depend on customer.

6.Q: What is our payment term?
A:We can accept the payment by T/T and Trade assueance .

7.Q: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine. 

8.Q: How can I know your machine works well?
A: Before delivery, we shall test the machine working condition for you.And we warmly welcome you to China for inspection.

9.Q:How to Place an order?
A:Please kinldy send us your order by email,we will confirm the PI with you .we wish to know the below:your details address,phone/fax number,destination,transportation way ;Product informaiton:item number,size,quantity,logo,etc.